- 27 Jan 2018 [14:02]
- shifted 23700 of the weights on theGCR regulation to from 50mm to 150mm off-centre as an experiment to see if pendulum twist can be controlled.
- 27 Jan 2018 [12:25]
- ADJUST: -5000ms/day to 28700 owing to the added mass of the regulation platform.
- 27 Jan 2018 [12:05]
- clock restarted
- 27 Jan 2018 [11:50]
- cavity probe reinstalled in cavity
- 27 Jan 2018 [10:14]
- cavity probe removed and insulation spacers added. Laid down on the carpeted floor to check for zero offset. Note that by 11.45am the temperatures have settled down to the same value.
- 27 Jan 2018 [09:45]
- pendulum stopped for access to pendulum case, plugging holes to get rid of draught. Also removed nut on Trinity Strike weight to give two dongs of extra time, hoping to get 7 days 12 hours between winds. Also fitted temporary platform to allow regulation weights to be placed up to 150mm off-centre as a means of regulating twist.
- 27 Jan 2018 [09:41]
- 09:41.50 close doo1546084800r to roof, End of experiment
- 27 Jan 2018 [09:39]
- 09:39:10 open door to roof,
- 27 Jan 2018 [09:37]
- 09:37.50 open clock case and remove shuttering around pendulum,
- 27 Jan 2018 [09:36]
- 09:36:10 open door to C5,
- 27 Jan 2018 [09:34]
- 09:34:30 close door to C5,
- 27 Jan 2018 [09:32]
- 09:32:15 pendulum case opened,
- 27 Jan 2018 [09:29]
- 09:29:15 hot water turned off,
- 27 Jan 2018 [09:28]
- 09:28:30 run hot water,
- 27 Jan 2018 [09:26]
- 09:26:50 close window,
- 27 Jan 2018 [09:25]
- 09:25:00 open window of C5,
- 27 Jan 2018 [09:22]
- 09:22:00 enter room C5 (Dr Hopkinson),
- 27 Jan 2018 [09:16]
- Experiment to understand Bedmaker Effect: 09:16 enter clock room,
Download data
